Start-Up; Installing The Light - LIVARNO LUX 8000.006.080 Instructions D'utilisation Et Consignes De Sécurité

former prior to assembly,
disassembly, cleaning or if
the light will not be used for
extended periods.
Never open any of the
components of the electrical
equipment or insert any ob-
jects into these components.
This will pose a risk of fatal
injury from electric shock.
The illuminant is not replace-
able.
This light is not suitable for
dimmer or electronic switches.
Only use the lamp with the
plug transformer delivered with
it (model XY-1201500-E).
How to prevent
fire and injury
Do not look directly in to the
light source (lamp, LED, etc.).
To prevent burns, ensure that
the light is switched off and
has cooled down before touch-
ing it. Lamps become very hot.
Do not cover the light or the
mains plug with objects. Exces-
sive heat can result in a fire.
20 GB/IE
Do not operate the lamp
unattended.
Safe
working
Install the light so that it is
protected from moisture and
dirt.
Always be attentive! Always
pay attention to what you
are doing and use common
sense.

Start-up

Remove all of the protective
foil from the LED table lamp.

Installing the light

Place the LED table lamp on
a flat surface with its back
side facing you.
Insert the mains adapter plug
into the connection
9
socket on the side of the
8
light.