Start-Up; Installing The Light; Adjusting The Lamp - LIVARNO LUX TI-LED-00798 Instructions D'utilisation Et Consignes De Sécurité

The illuminant is not replace-
able.
This light is not suitable for
dimmer or electronic switches.
Only use the lamp with the
plug transformer delivered with
it (model K15S100120G).
How to prevent
fire and injury
Do not look directly in to the
light source (lamp, LED, etc.).
To prevent burns, ensure that
the light is switched off and
has cooled down before touch-
ing it. Lamps become very hot.
Do not cover the light or the
mains plug with objects. Exces-
sive heat can result in a fire.
Do not operate the lamp
unattended.
Safe
working
Mount the light so that it is
protected from moisture and
dirt.
Always be attentive! Always
pay attention to what you
are doing and use common
sense.
Never assemble the lamp
whilst unfocused or feeling
unwell.

Start-up

Remove all of the protective
foil from the LED table lamp.

Installing the light

Place the LED table lamp on
a flat surface with its back
side facing you.
Insert the mains adapter plug
into the connection socket
9
on the back of the lamp.
7
Plug the mains plug
a properly installed socket.
Your lamp is now ready for use.

Adjusting the lamp

Note: Only change the alignment
of the lamp when it is switched off.
into
9
GB 39