Burkert 8026 Guide Rapide page 39

Type 8026 - 8036 - SE36
Adjustment and commissioning
8.8.7 Adjusting the current outputs
Warning
risk of injury due to wrong adjustment.
▶ Make sure the Hold mode is disabled (see chap. 8.8.6).
Outputs
Calib
The entered values are not memorised in this menu. Only the values emitted on the current outputs are adjusted after pressing "OK"
when the message "Recalibrate AC outputs?" is shown.
AC1 / AC2 4mA:
20mA:
INPUT
INPUT
English
39