Installation; Safety Instructions Installation - Burkert 2000 Mode D'emploi

Type 2000
6

INSTALLATION

6.1

Safety instructions installation

DANGER!
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
sure. Vent or drain lines.
WARNING!
Risk of injury due to improper installation.
▶ Only trained technicians may perform installations.
▶ Perform installations with suitable tools only.
WARNING!
Risk of injury due to unintentional activation of the system and
uncontrolled restart.
▶ Secure plant to prevent unintentional activation..
▶ Ensure that the plant starts up in a controlled manner only.
DANGER!
For control function I: Danger due to the control pressure fail-
ing.
If the control pressure fails, the valve remains in an undefined
position.
▶ For a controlled restart, pressurize the device with control
pressure and then connect the medium.
Installation
WARNING!
Risk of injury due to moving parts.
▶ Do not reach into openings in the device.
CAUTION!
Risk of injury due to heavy device.
During transportation or installation work, a heavy device may
fall down and cause injuries.
▶ Heavy equipment must only be transported, assembled and
disassembled with the help of a second person.
▶ Use suitable tools.
WARNING!
Valve seat not sealed when control pressure too low or oper-
ating pressure too high.
If control pressure for control function B and control function I is
too low or operating pressure is too high, this can cause the
valve seat to leak.
▶ Comply with minimum control pressure and maximum operat-
ing pressure values.
english 13