Service - Metrix GX1010 Notice De Fonctionnement

Press CONFIRM twice to store new values and exit calibration mode.
3.4.

Service

Ensure that the correct mains fuse is fitted for the set operating voltage. The correct mains
fuse types are:
To replace the fuse, disconnect the mains lead from the inlet socket and release the fuse
drawer below the socket pins by depressing both clips together, with miniature
screwdrivers, so that the drawer can be eased open. Change the fuse and replace the
drawer.
The use of makeshift fuses or the short-circuiting of the fuse holder is prohibited.
For problems concerning maintenance, spare parts, warranty, etc., please contact your
METRIX local agency.
This organisation will quickly process orders for spare parts and will help you towards a
quick repair and calibration service.
"
NOTE :
8 - II
for 230V operation:
for 100V or 115V operation:
The replacement fuse must be the same size and rating as the fuse
supplied.
250 mA (T) 250 V HRC
500 mA (T) 250 V HRC
GX1010