Specifications; General; Technical Specifications; Functional Performance - Metrix GX1010 Notice De Fonctionnement

7.

SPECIFICATIONS

7.1.

General

Only the values assigned tolerances or limits are guaranteed values.
tolerances are given for information only, without guarantee.
Specifications apply at 18°-28°C after one hour warm-up, at maximum output into 50Ω
Display:
Data Entry:
Stored Settings:
7.2.

Technical specifications

7.2.1. Functional performance

7.2.1.1. FREQUENCY
Range:
Resolution:
Accuracy:
Temperature Stability:
7.2.1.2. SYMMETRY
Range:
Resolution:
7.2.1.3. WAVEFORMS
Sine, square, positive pulse, negative pulse, multi-level squarewave, triangle, ramp up,
ramp down, DC, ARB and Noise.
• Sinewave
Output level:
Harmonic Distortion:
Non-harmonic Spurii:
• Squarewave
Output level:
Rise and Fall Times:
• Triangle
Output level:
Linearity error:
60 - II
20 character x 4 row alphanumeric LCD.
Keyboard selection of mode, waveform etc.; value entry
direct by numeric keys or by rotary control.
Up to 9 complete instrument set-ups may be stored and
recalled from battery-backed memory.
0·1 mHz to 10 MHz.
All waveforms are available up to 10 MHz. However, the
purity of triangle, ramp and multi-level squarewave
waveforms is not specified above the frequencies
indicated in the appropriate WAVEFORM section. In
Arbitrary mode all waveform points are continuously
output up to approximately 27 kHz beyond which they
are sampled.
0·1mHz (7 digits)
Typically ± 10 ppm for 1 year, 18°C to 28°C
Typically <1 ppm/°C
Sine, Triangle, Ramp - 1% to 99% at all frequencies
Squarewave,Pulse -
10MHz.
0·1%
5mV to 20V p-p open circuit o/p.
<0·3% THD to 500kHz;
<-50dBc to 1MHz, <-35dBc to 10MHz.
typically <-55dBc to 10MHz.
5mV to 20V p-p open circuit o/p.
<25ns
5mV to 20V p-p open circuit o/p.
<0·5% to 30 kHz
1% to 99% to 30kHz, 20% to 80% to
Values without
GX1010