Publicité
safety precautions and usage statements
Weight Limits:
This product is not rated to support weights exceeding
650 for the e4
+
/e4 or 850 pounds for the e9, e6
This product is not rated to support weights in excess of
650/850 pounds inclusive of the mattress and bedding.
The base will structurally support this weight, provided it
is evenly distributed across the bed base. The adjustable
base is not designed to support or lift this amount in
the head or foot sections alone. Exceeding this weight
restriction could damage the bed and/or cause injury
and will void the warranty
Acoustics:
The massage function will emit a noticeable tone
during operation. As the massage intensity level is
increased, the tone will intensify. The volume of this
tone is directly related to the location environment.
For example, when demonstrated in a show room,
the surrounding environmental noise will cover some
of the massage noise. However, when installed in a
home setting with wooden floors, carpeted or not, the
massage volume will be more noticeable. In normal
base operation, the wheels which allow the bed to
maintain its distance from the wall, will make contact
with the steel platform supports of the base creating a
contact noise. When entering, exiting or shifting weight
on the base, this contact noise may be audible as the
wheels make contact. This is normal.
SAVE THESE INSTRUCTIONS
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding the RF exposure requirement and void
user's right to operate the device.
Radio Frequency: 2.4 GHz
2
Fabric Care:
To prolong the life of your fabric, protect from direct
sunlight whenever possible. For spot cleaning, wipe area
+
/e6.
with a light damp sponge or vacuum with a soft brush
attachment to remove particles. Keep at a minimum of
30cm (12 inches) away from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry
cloth. Wipe with a clean cloth dampened with warm
water. Do not wet excessively. A soft bristle brush may
be used to remove ingrained soil. Avoid scratching by
gentle brushing. Wipe with a clean cloth dampened
with warm water to remove residues. Dry in shade away
from direct heat.
If persistent marks remain visible after cleaning, seek
professional advice.
parts list
All electronics and components that need to be installed are located in boxes under the base or
attached to the frame. Before discarding the packing materials - ensure all the parts are accounted for.
INCLUDED WITH ALL SERIES
(1) Mattress Retainer Bar*
(4) Legs
INCLUDED WITH e9, e6
(1) Wireless Remote & 3 AAA Batteries
AVAILABLE FOR e9, e6
(2) Headboard Bracket
(2) T-Bracket
INCLUDED WITH e4 ONLY
(1) Wired Remote
*
These items are attached to the base for shipping purposes. Carefully remove from base and set aside.
‡
Only included in Twin, Twin Long, Queen Split and Cal King Split bases.
OPTIONAL EQUIPMENT (NOT INCLUDED)
Surge Protector
Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.
(1) Power Cord
(1) Power Supply
(2) Connecting Straps *‡
, e6 & e4
ONLY
+
+
(1) Smart Sync™ ‡
(1) Power Down Box*
& e6 ONLY
+
(2) Spacer
(8) Long Bolt
(10) Short Bolt
(1) Y-Cord ‡
(1) Battery Backup Box
9 Volt Batteries
9/16" & 1/2" Socket and Crescent Wrench
(18) Nut
3
Publicité
