Publicité
e9/e6
/e6/e4
setting remote custom presets
+
+
The e9/e6
/e6/e4
has a programmable feature that allows you to save two custom positions.
+
+
Please read all the instructions below before setting your custom presets on the remote.
STEP 1
Articulate the head and foot to your desired position.
STEP 2
FOR e9/e6+/e6 in select markets
Press and hold one of the picture pre-set buttons
[
] for at least 10 seconds. The LED lights at
top of remote will flash in succession 3 times. Position is
now saved.
FOR e4+ in select markets
Press and hold one of the picture pre-set buttons
[
] for at least 10 seconds. Position is now saved.
NOTE: To restore the preset buttons back to their original factory settings, hold FLAT and ZERO-G simultaneously
for at least 10 seconds. The original presets will be restored.
To adjust the saved position, repeat steps 1 and 2 and the new position will be stored.
16
Available in select markets
e9 bluetooth® remote control setup
To operate the base from a smart device, the Ergomotion Remote application must be downloaded to
the desired smart device from the App Store (Apple) or Google Play Store (Android).
STEP 1
Unplug the base from power source (a surge protector
is recommended). Wait 30 seconds and plug back in.
STEP 2
The BT CONNECTION LED on the control box will
blink blue for 2 minutes. During this time the base is
discoverable by any Bluetooth® compatible device.
STEP 3
Locate Bluetooth® settings on your smart device.
Select the device that begins with Base-i######. The
blue light on the control box will stop blinking and will
remain illuminated as long as a Bluetooth® connection
is established.
NOTE: This ID number matches the number listed on the
control box.
For assistance setting up a Bluetooth® connection, refer to your smart device's owners manual
or contact the manufacturer directly.
STEP 4
Open the Ergomotion application on your device
and select your Base-i###### ID number (if not
automatically prompted, select the "Settings" button
within the app).
The remote on the application may be used to operate
the base.
See Remote Overview (pg 12) for remote operating
instructions.
17
Publicité
