Intenza+" Water Filter; Intenza+" Water Filter Installation - Gaggia Milano ANIMA PRESTIGE Mode D'emploi

English
14

"INTENZA+" Water Filter

"INTENZA+" Water Filter Installation

We recommend that you install the "INTENZA+" water fi lter as this prevents
limescale build-up in your machine and preserves a more intense aroma of
your coff ee.
The "INTENZA+" water fi lter can be purchased separately.
Water is a crucial part of every coff ee, so it is very important to always have it
professionally fi ltered. Using the "INTENZA+" water fi lter will prevent mineral
deposits from building up and improve your water quality.
Remove the small white fi lter from the water tank and store it in a dry place.
Immerse the "INTENZA+" water fi lter vertically in cold water (with the open-
ing positioned upwards) and gently press its sides to let the air bubbles out.
Set the "INTENZA+" water fi lter according to the measurements performed
(see "Measuring the water hardness") and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 small squares
B = hard water (standard) – equals 3 small squares
C = very hard water – equals 4 small squares
Insert the "INTENZA +" water fi lter in the empty water tank and push it down
to the lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see
the "Dispensing Hot Water" chapter).
Then, fi ll the tank again.
1 Press the MENU and the OK buttons to confi rm. Scroll until selecting the
water fi lter. Press the OK button.
2 Select ON, then press OK and fi nally exit from the menu.