Migatronic RWF 32 Guide De L'utilisateur page 7

Connection and operation
Warning
Read warning notice and instruction manual carefully prior to initial operation and save the information for
later use.
The RWF 32/33 unit is supplied ready for use with SIGMA SELECT in both standard and robotic setups.
It is possible to connect up to three RWF 32/33 units to a welding machine/power source.
ZA connection
RWF 32
RWF 33
1. Torch collision protection and touch sense connection
2. Connection Push-Pull
3. Compressed air connection AIR Clean - Outlet (not all models)
4. CAN-plug
5. Collision protection signal to robot controller
6. Torch connection
7. Power +
8. Wire inlet
9. Gas connection
10. Compressed air connection AIR Clean – inlet (not all models)
11. Connection of cooling hose (not all models)
- flow (blue)
- return (red)
12. Status indicator
Panasonic connection
RWF 32
RWF 33
7