Safety; Layout Of The Safety Information; How Pictograms Are Used; Product Safety - Storch MS 10 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

3. Safety

3.1 Layout of the safety information

The following safety instructions may be shown in the operating manual with varying hazard levels that must be obser-
ved:
DANGER indicates imminently hazardous dangers, which can result in death or serious injury if no safety measures
are taken.
WARNING indicates hazards that can result from incorrect behaviour and cause death or serious injury (e.g. misuse,
disregarding instructions, etc.).
CAUTION indicates possible hazardous situations which, without proper safety precautions, may result in minor or
moderate injury.
NOTE indicates situations that may result in property damage if proper precautions are not taken.

3.2 How pictograms are used

In addition to the previously mentioned safety instructions, the following pictograms with the adjacent meaning may be
included:
Prohibition of an action or activity related to a source of danger, where failure to observe may lead to seri-
ous accidents.
Warning of the danger represented by the pictogram.
Prohibition of an action or activity related to handling a source of danger, where failure to observe may lead
to serious accidents.

3.3 Product safety

3.3.1 Intended use

Spraying and flooding unit for efficient processing of low-viscosity, unfilled media (solids) (see Processable materials
4.3) with very high area outputs. Conditionally also solvent-based media after consultation with the service hotline on
0800-7867247.
3.3.2 Foreseeable misuse – NOT PERMITTED –
Processing of
- low molecular weight hydrocarbon compounds (e.g. nitro)
- solid-filled (e.g. quartz sand) coating materials
- highly flammable/explosive media
- media with high chlorine and acidic content and high alkaline content
- operation in areas with explosion protection
- Unintended use
- Processing unsuitable media
- Modifications to the device
- Use of wear parts not approved by the manufacturer
Translation of the original instruction
DANGER
WARNING
CAUTION
NOTE
60

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

60 08 50

Table des Matières