Power Boost; Power Management; Bridging Function - Kuppersbusch KMI8500.0 Mode D'emploi

Operation
Modules (power management)
34

Power boost

The power boost setting makes additional power available for induc-
tion cooking zones. A large quantity of water can be brought to the
boil very quickly. The power boost setting operates for 5 minutes, after
which the power level is automatically reduced to power setting 9.
1.
Switch on the hob.
2.
Then press a cooking zone selection key (e.g.
The selected power setting indicator will light up brightly.
3.
Press the Minus key once in order to set the highest power
setting (9).
4.
Press the Plus key once in order to activate the power
boost setting. The power setting indicator will show a P.
5.
After 5 minutes the power boost setting will switch off automati-
cally. The P will go off and the power level will switch down to 9.
Important
Press the minus key to prematurely de-activate the power setting.
Attention. risk of overheating! Do not heat up any oil/frying fat with
the power boost setting.

Power management

For technical reasons two cooking zones always comprise a module
and have a maximum power level.
If this power range is exceeded when a higher power setting level
or the power boost function is switched on the power management
system will reduce the power setting of the corresponding cooking
zone of the module. The display for this cooking zone will initially
blink, after which the highest-possible power setting will be consist-
ently displayed.

Bridging function

The front and the rear cooking zones may be activated together for a
cooking process (bridging function). This enables larger cookware to
be used.
1.
Switch on the hob.
2.
Press the two cooking zone selection keys of the front
and back cooking zones simultaneously to activate the
bridging function. The bridging function is activated, the symbol
appears. Use the Plus key
power setting.
3.
To deactivate the two cooking zone selection keys press them
simultaneously again or switch off the hob.
Important
The roaster or the pot will need to cover at least half of the cooking
zones used in order to be recognised by the pan recognition device!
GB
for back).
or Minus key to select a