Kuppersbusch KMI8500.0 Mode D'emploi page 28

Appliance description
Operating the hob with the sensor keys
The glass ceramic hob is operated with touch control sensor keys.
The sensor keys are operated as follows: lightly touch a symbol on
the surface of the ceramic glass plate. A buzzer will indicate when the
controls have been operated correctly. The touch control sensor key
will be indicated as a »key« from now on.
Standby key (13 )
This key is used to switch the entire hob operational. It is, as it were,
the main switch. When the hob has been switched off with this key, it
will remain on standby for approx. another 120 min.
Attention! The residual heat indicator will no longer operate when the
appliance has completely switched off.
ON/OFF key (7) Cooking zones left or right
This key is used to switch the left or right cooking zones on and off.
Cooking zone selection key; e.g. front
Pressing one of the cooking zone selection keys available will select
a cooking zone, for which the Plus key or the Minus key may be used
to set the cooking level.
Minus key / Plus key
These keys are used to set the cooking levels, the automatic switch-
off device and the minute minder.
The Minus key reduces the setting and the Plus key raises it.
Power setting indicator
The power setting indicator shows the power setting which has been
selected, or:
lights up brightly, showing Cooking zone has been selected
_______________ Residual heat indicator
_______________ Power boost
_______________ Childproof lock
_______________Bridging function
ER03_____________Error message
Control lamp Timer function
28
(8)
(10)
(11)
Minus key /Plus key Ventilation (14)
These key are used to operate the fan (extractor fan). It can be oper-
ated independently of the hob.
Fan indicator (15)
__________fan setting
min__________fan time lag
GB