Locking; Power Boost; Power Management - Kuppersbusch EKID9940.0 Mode D'emploi

Operation
10 Min.
Modules (power management)
34

Locking

The lock can be used to lock key operation and cooking level settings. Only
the ON/OFF key can be used to switch the hob off.
Activating the lock
1. Press the Lock key
the Lock key will light up.
Switching off the lock
2. Press the Lock key
above the Lock key will go off.
Notes
• An activated lock will remain activated even if the hob is switched off. It
must therefore be de-activated when cooking is re-commenced.
• In the event of a power cut the lock will be cancelled, i.e. deactivated.

Power boost

The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
1. Switch on the hob.
2. Press the respective touch control
allocate it to a specific cooking zone.The power setting display shows
and the power boost setting has been switched on.
3. After 10 minutes the power boost setting will switch off automatically. The
will go off and power setting 9 will be reset.
Please note:
Press the respective touch control
power boost setting.

Power management

For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
to activate the function. The control lamp above
to deactivate the function. The control lamp
on the far right to
to prematurely switch off the
GB