Power Selection Zone "Slider" And Timer Setting Zone; Starting-Up; Pan Detection; Residual Heat Indication - Kuppersbusch KI9820.0SF Mode D'emploi

Power selection zone "SLIDER" and timer setting zone

To select the power with the slider, slide your finger on the "SLIDER" zone. You can also directly access a particular
level if you put your finger directly on the chosen level.

Starting-up

•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 seconds the electronics returns to waiting position.

Pan detection

The pan detection ensures perfect safety. The induction doesn't work:
•
If there is no pan on the heating zone or if this pan is not suitable to the induction. In this case it is impossible
to increase the power and the display shows [ U ]. This symbol disappears when a pan is put on the heating
zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows [ U ]. The symbol [
U ] disappears when the pan is put back on the heating zone. The cooking continues with the power level set
before.
•
After use, switch the heat element off: don't let the pan detection [ U ] active.
•

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones are still hot and
indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any heat sensitive object
on them. There are risks of burn and fire.
Power selection zone "SLIDER" and timer setting
"SLIDER"
Control panel
press key [
press key [
Control panel
press display [ 0 ] selected
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
]
]
35
Direct access
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ]
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]