General Manual Settings - Viscount Chorale 3 Mode D'emploi

Orgue électronique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Viscount Chorale 3
containing the following parameters:
o OUT 1: volume of output [OUTPUT 1].
o OUT 2: volume of output [OUTPUT 2].
All the levels can be set in a range of values from 1 to 32, with the following relative dB:
-
32: 0 dB
-
20: -12 dB
-
16: -16 dB
-
10: -22 dB
-
1: -31 dB
Naturally, intermediate signal level values will be obtained when values between these settings are shown
on the display.
NOTE
-
The rear output volume settings also affect the signals supplied to the RCA [OUTPUT] outputs
in the recess underneath the manuals.

6.6 GENERAL MANUAL SETTINGS

The KEYBOARD SETTING function, recalled using the option of the same name in the SET UP menu,
contains two different parameter relating to operation of the organ manuals. The video page displayed is
as follows:
containing the following display options:
o I/II INVERS.: inversion of the manuals, so that the Man.I registers are played with the second
manual and vice-versa.
o KEY VELOCITY: activates the manual key dynamics. When this function is active, you can play
the Orchestral voices and transmit the MIDI notes in response to the speed at which the manual keys
are pressed.
If the function is turned off, the notes are always played with fixed dynamic equal to the MIDI value
100.
To activate the two functions, use the [VALUE +] and [VALUE -] buttons to select the value YES, or
select NO to deactivate them. Use the [FIELD ] and [FIELD ] buttons to move the cursor and [EXIT]
to save the new settings and return to the SET UP menu.
64
Owner's Manual

Publicité

Table des Matières
loading

Table des Matières