Replacing Voices - Viscount Chorale 3 Mode D'emploi

Owner's Manual
containing the organ's three sections.
Select the section containing the voice the volume of which you wish to adjust or press its stop on the
front panel.
The display shows the first four voices in the section recalled (and the stop number); now use the
[FIELD ] and [FIELD
If you have recalled the voice using the stop, the voice and its volume will be displayed immediately.
To regulate the volume, use the [VALUE +] and [VALUE -] buttons.
The new value is rendered audible immediately and saved; press [EXIT] to return to the previous screen.
IMPORTANT NOTES
- The volumes of the individual voices are automatically saved in the current Organ Style (see
also section 4). This means that when another style is recalled, the volumes will be reset to the
values described in the last style recalled. When the style in which the voice volumes were
changed is reloaded, the volumes will be reset to the latest adjustments.
- To restore the original volumes of all the styles or one in particular, recall the FACTORY SETTING
function described in point 8.1.

5.2 REPLACING VOICES

As described at the start of this section, the Chorale 3 has an interesting, useful voice replacement function.
The organ has a vast internal library of voices, comprising various variations on the original voices.
To recall this function, select the ALTERNATIVE VOICE option from the VOICES submenu; the display
will show the first screen:
in which you have to select the section of the organ containing the stop of the voice to be replaced, or
press the stop itself on the front panel (as if to switch it on). In the first case the display shows the first
four voices in the section selected.
] buttons to select the voice required.
55
Viscount Chorale 3