Organ Style - Viscount Chorale 3 Mode D'emploi

Owner's Manual
One important feature of the Chorale 3 series is the availability of three different organ styles, Baroque,
Romantic and Symphonic, which allow you to set the sound configuration perfectly suited to the literature
you intend to perform. There is also a variation for each style, giving a total of 6 organ styles.
Moreover, each style automatically saves the modifications made to the sound setup using the voice
replacement functions and voice volume adjustments. This means that each style can be modified and
customised to personal taste, making the organ extremely flexible.
The screen used to select the organ style required can be accessed by selecting the ORGAN STYLE
option in the SETTING MENU:
After selecting a style, you will need to check whether the front panel stops and registers still correspond,
since most of the voices will have changed (especially when you select styles from different historic
periods; the changes will be fewer if you load the variation of the style already in use, e.g. by replacing
Baroque 2 with Baroque 1).
To check the voice - stop correspondence, recall the SOUND CHECK function described in point 5.3.
As described in the instruction to this section, it is important to remember that the Organ Styles save the
status of the following functions:
- Alternative Voice (voices assigned to each stop)
- Voice Volume (volumes of the voices)
- Reverberation (type of reverb effect)
- Internal Equalizer (equalizer for the internal amplification system)
- External Equalizer (equalizer for the rear audio outputs)

4. ORGAN STYLE

53
Viscount Chorale 3