Viscount Chorale 3
Owner's Manual
5. REPLACING VOICES AND REGULATING VOICE VOLUMES
One important new feature of the Chorale 3 series is the capability for replacing the voices initially
associated to the front panel stops with other voices already provided in the organ's internal memory.
In practice, this gives quick, easy voice replacement, which however enables you to set your organ's
entire sound setup exactly as you wish and at any time, with considerable advantages for the customisation
of the instrument, and for its use by more than one organist (each of them will be able to have their own
set of voices). The register setup can be further adjusted to individual requirements through regulation of
the volume of each individual voice.
All voice management functions can be recalled by selecting the VOICES field in the SETTING MENU.
The video page displayed is as follows:
containing the following functions:
o VOICES VOLUME: regulates the volume of the voices.
o ALTERNATIVE VOICE: used to replace voices.
o SOUND CHECK: checks the voices associated to the stops.
To display the function required, select the relative display field using the [FIELD
] and [FIELD
]
buttons and press [ENTER]. Use the [EXIT] button to return to the SETTING MENU.
5.1 REGULATING THE VOICE VOLUMES
The VOICES VOLUME function allows you to adjust the volume of each individual voice in a range
from -9 dB to +9 dB. Each modification is saved immediately and is audible in real time, making it easier
for the user to obtain the setting required. You must also remember that the voice volumes are saved by
the organ styles, so when a style change is made, apart from possible replacements of the stop voices, the
volumes will also be reconfigured to suit the selected style.
However, changes made to the volumes are not lost when different styles are recalled and they are retained
in the memory within the style.
To recall this function, select the VOICES VOLUME option from the SETTING MENU; the display will
show:
54