B.A. International Optima OS600L Mode D'emploi page 8

4.4 Installation of irrigation tube
External spray nozzle Irrigation tube
Irrigation tube Tube clip
Internal spray nozzle 'Y'tube
External spray nozzle
'Y'tube Irrigation tube
Tube clip
① Attach the irrigation tube to the straight
or contra-angle handpiece.
② Attach the motor cable and irrigation tube
in regular intervals using the coolant clip.
Irrigation tube
Push button
Connect irrigation cover
and Irrigation tube
Tube clamp
Coolant container
Insert needle
7
③ Open Irrigation cover by pressing Push button.
④ Put Irrigation tube in the groove.
⑤ Close Irrigation cover.
⑥ Close the tube clamp.
⑦ Open the tube clamp before start-up.
⑧ Stick the insert needle into the coolant container.
⑨ Hook-in the coolant container on the bottle holder.