Chapter 3. Description - B.A. International Optima OS600L Mode D'emploi

2.3 Caution
1) Never attempt to disassemble or modify the device. Once the device is disassembled,you will no longer be entitled to after sales service from the manufacturer.
2) Never add oil to the inside of the BLDC motor. This can cause the bearings to malfunction and get hot.
3) Do not use thinner, benzene or any other solvents to clean.
4) Use only products and supplies that are prescribed by the specifications of the manufacturer.
5) If the power cord or plug socket is broken or damaged, do not use the deviceand inquire with the manufacturer. This could pose a risk of electric shock or fire.
6) When removing the power cord from the socket, be sure to pull the plug head, and do not do this with wet hands. Do not use the device with the power plug loosely connected.
This could pose a risk of electric shock or fire.
7) Do not install near a heat source, and do not place near lit candles or cigarettes. This could pose a risk of fire.
8) Determine if there are any elderly, sick, injured, disabled persons, pregnant women or children near where the device is installed, and keep a close eye on such persons.
Do not leave children alone with the device.
9) Ensure that the main body of the implant engine and the foot pedal do not come in contact with water, saline solution or other contaminants. If the device is not operating properly,
or contaminants have entered the product, do not operate the device under any circumstances and inquire with the manufacturer instead.
10) Please use the device in accordance with the use stated in this user manual and refrain from using the device for any other purpose than that recommended by the manufacturer.
The manufacturer will not be held liable for any accidents caused by a disregard for the instructions in the manual.
11) The external equipment for connecting the signal input piece, signal output piece or other connecting pieces must meet the IEC publication standards.
2.4 Warning
1) Prior to or during use, if you notice any abnormal symptoms including vibration, heat or abnormal noise, discontinue any use immediately and inspect the device.
2) Always use earthed socket for power supply.
3) With regard to tools used for implant procedure, please maintain the speed recommended by the manufacturer. Exceeding the recommended speed carried the risk of an accident.
Chapter 3. Product Description
3.1 Description of System, Components and Functions
※ Handpiece – sold separately
Motor (BA160530) Main controller (BA160510) Foot switch (BA160535)
3