Technical Data; Installation Instructions - Truma DuoComfort Mode D'emploi

Technical data

Supply voltage
12 V
Current input
summer operation: 1,5 mA
winter operation with
defroster (EisEx): 160 mA
The Remote indicator complies
with the vehicle engine inter-
ference suppression directive
72/245/EEC with supplements
2004/104/EC and 2005/83/EC:
e1 03 4352.
8

Installation instructions

Only an expert technician
may install and repair the
remote indicator.
When using specific vehicle or
manufacturer control panels, the
electrical connection must be
in accordance with the Truma
interface description (part no.
50020-56600).
The electrical connec-
tion or the connection
to a cable extension must not
be effected in the cylinder
container!
For passing cables through a
cylinder container (9), use rubber
grommets or bodywork sealing
material. Establish the cable run
at least 50 cm above the base of
the cylinder container.
Assembling the remote
indicator's transmitter
Fig. A
Use the transmitter (5) to turn
off and remove the hexagon on
the visible indicator. Completely
remove any chips that may be
left behind.
Place the transmitter (5) onto the
visible indicator (4).
Lead the three-pole connection
cable (6) from the cylinder box
and connect it to the black plug
on the control panel cable.