Function Check - Truma DuoComfort Mode D'emploi

If necessary, the voltage supply
can be lengthened with an ex-
tension cord of 2 m x 0.75 mm².
When using power supply
units, make sure that the
output voltage is between 11 V
and 15 V.
With the Truma transformer
connector (part no. 53110-01)
the remote indicator can also
be operated with 230 V. The
transformer connector supplies a
12 V alternating current with low
power. The two cables on the
transformer connector can be
connected in any order. Only the
remote indicator can be powered
over the transformer plug (it is
not possible to connect
additional 12 V devices).
10

Function check

The operation of the remote
indicator must be tested after
installation, as described in the
operating instructions.
The operating instructions are to
be handed over to the user.