Three-Thread Overlock With One Needle - Baby Lock Vibrant BL460B Instruction Et Guide De Référence

THREE-THREAD OVERLOCK WITH ONE NEEDLE

By threading the LEFT needle only a width of 6 mm will be produced and by threading the
RIGHT needle only a width of 3.8 mm will be produced.
Please keep the unused needle on the needle pad as illustrated.
NARROW AND ROLLED HEM, PICOT STITCH
Narrow and rolled edge is ideal for use on thin materials such as georgette crepe, crepe de
chine, silk etc.
Also, picot stitch can be produced particularly when sewing on fine 'scarflike' materials.
In view of the nature of these hems, they are unsuitable for use on 'hard' or 'heavy' materials.
1. Raise the presser foot.
2. Open the front cover and working table.
3. Remove the stitch finger from the needle plate by screw driver and keep it in the front
cover as illustrated or in the accessory bag.
4. Set the machine according to page 28.
Note: 1. Please use following recommended thread for making ideal seams.
2. After finishing, re-set the stitch finger in its place. Please ensure inserting it deep as
illustrated in Fig 1.
Illustration * I : Stitch finger
* II : Cross section
ENGLISH
*
*
Fig. 1
36
1
*
1
2
Fig. 2 Fig. 3
*
*
2
2
1
Fig. 1
Fig.4