Manitowoc QM45 Instructions D'installation page 15

Masquer les pouces Voir aussi pour QM45:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section 4
G. Remove the Water Trough
Apply downward pressure on the siphon tube and
remove from the bottom of the water trough.
Remove the upper thumbscrew.
While supporting the water trough remove the two
thumbscrews from beneath the water trough.
Remove the water trough from the bin area.
LOWER
THUMBSCREWS
Part Number 040001360 6/14
UPPER
THUMBSCREW
REMOVE
SIPHON TUBE
H. Remove the ice damper.
Grasp ice damper and apply pressure toward the left
hand mounting bracket.
Apply pressure to the right hand mounting bracket
with thumb.
Pull ice damper forward when the right hand ice
damper pin disengages.
Installation
Place ice damper pin in left hand mounting bracket
and apply pressure toward the left hand mounting
bracket.
Apply pressure to the right hand mounting bracket
with thumb.
Push ice damper toward evaporator until right hand
damper pin engages.
Maintenance
15

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Qm45a

Table des Matières