Handpiece Holder; Tip ( G4, G6, G8 ) - NSK Varios 370 Manuel D'utilisation

9. Holder

9-1 Handpiece Holder

While the Handpiece is not in use, put the Handpiece on the Handpiece
Holder. ( Fig.17 )
NOTICE
To prevent injury, always mount Scaler Tip Cover S.
9-2 Tip Holder ( Option )
For a Tip removed from the handpiece, use the Tip
Holder.
The Tip Holder is Autoclavable and hold up to 5 tips at
once. To Autoclave, tilt the tips in the direction of the
arrow in Fig.18.
10. Care and Maintenance
10-1 Cleaning of Optic Fiber ( Varios2 Lux )
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol soaked cotton swab. ( Fig.19 )
CAUTION
Do not use any sharp pointed tools to clean the Optic
Fiber End Face. In case the light degridation, contact
dealer.
10-2 Changing O-Ring
Handpiece Cord
An O-Ring is located in the Handpiece Cord Connector. Use a pointed tool to remove,
and mount new O-Ring into the groove. ( Fig. 20 )
Optional O-Ring: Order Code 0310020080
Varios370 EN-140501.indd 11
Tip
Optic Fiber End Face
11
Handpiece Holder
Fig.17
Tip Holder
Fig.18
Fig.19
O-Ring
Fig.20
2014/05/07 18:05:19