NSK Varios 370 Manuel D'utilisation page 6

Masquer les pouces Voir aussi pour Varios 370:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3-2 Connecting
Insert each plug into appropriate connector. ( Fig.1 )
Align the " " Mark on the Foot Control Connector and Foot Control Plug and connect those firmly into Foot Control
Connector.
Connect Water Tube ( Non-Filter Side, refer to Fig.21 for detail ) firmly into Water Tube Connector.
Connect AC Adaptor into DC Connector.
Foot Control Plug
CAUTION
· Insert plugs firmly into the connector. Lose connection may be cause a malfunction.
· Ensure Power is OFF on the Control Unit during the AC Adaptor Connection.
· Do not connect the cord in wall outlet before connecting DC Connector.
· Do not pull the AC Adaptor forcibly.
· Do not disconnect the AC Adaptor while pressing on the Foot Control.
· Turn OFF the power to connect or disconnect the cords and plugs.
3-3 Disconnecting
3-3-1 DC Plug and Foot Control Plug
Simply pull out plugs from the Control Unit.
3-3-2 Water Tube ( Fig.2 )
Pull out the Water Tube while pushing the
White Ring.
CAUTION
It requires the water removal before the Water tube disconnection.
Varios370 EN-140501.indd
5
Mark
Water Tube
PULL
PUSH
White Ring
5
Fig.1
Fig.2
2014/05/07
18:05:17

Publicité

Table des Matières
loading

Table des Matières