Handpiece Holder; Double-Face Tape - NSK Varios 370 Mode D'emploi

3-2 Connecting
Insert each plug into appropriate connector. (Fig.1)
Align the " " Mark on the Foot Control Connector and Foot Control Plug and connect those firmly into
Foot Control Connector.
Connect Water Tube (Non-Filter Side, refer to Fig.22 for detail) firmly into Water Tube Connector.
Connect AC Adaptor into DC Connector.
Mark
Foot Control Plug
Insert each plug and tube firmly into the connector. If connection is incomplete, it may cause
•
a malfunction.
CAUTION
Ensure Power is OFF on the Control Unit during the AC Adaptor Connection.
•
Do not connect the cord in wall outlet before connecting DC Connector.
•
Do not pull the AC Adaptor forcibly.
•
Do not disconnect the AC Adaptor while pressing on the Foot Control.
•
Turn OFF the power to connect or disconnect the cords and plugs.
•
3-3 Disconnecting
3-3-1 DC Plug and Foot Control Plug
Simply pull out plugs from the Control
Unit.
3-3-2 Water Tube (Fig.2)
Pull out the Water Tube while pushing
the White Ring.
Shut off the main valve of the water injection, and then remove the tube.
•
It requires the water removal before the Water tube disconnection.
•
CAUTION
3-4 Handpiece Holder (Fig.3)
Peel off cover of the Double-Face Tape.
Fix the Handpiece holder on the flat surface.
Water Tube
PUSH
White Ring
6
Fig.1
PULL
To flat surface
Double-Face Tape
Fig.2
Fig.3