Handpiece Holder; Care And Maintenance - NSK Varios 970 Mode D'emploi

9. How to Use Tip Cover S (Option)
Grip the Tip Cover S and insert it to the Tip.
To remove, grip the Tip Cover S and the handpiece & pull. (Fig. 27)
The Tip Cover S is not designed for use as a Tip changing tool.
CAUTION
Carefully insert the Tip
into the Tip Cover S. Avoid
injuring the fingers.

10. Handpiece Holder

While the Handpiece is not in use, put the Handpiece in the
Handpiece Holder.
The Handpiece Holder is adjustable. (Fig. 28)
CAUTION
Do not put excessive load to the Handpiece Holder
to prevent from breaking down and deformation.
NOTICE
To prevent injury, always mount Scaler Tip Cover (S).

11. Care and Maintenance

(1) Cleaning of Optic Fiber (Varios 970 LUX)
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol soaked cotton swab. (Fig. 29)
CAUTION
Do not use any sharp pointed tools to clean the
Optic Fiber End Face. In case the light degridation,
contact your dealer.
Slit
14
Slit
Tip Cover
Tip-Handpiece Joint
Optic Fiber End Face
Tip
Fig.27
Handpiece Holder
Fig.28
Fig.29