Handpiece Holder; Tip Holder (Option) - NSK Varios 570 Mode D'emploi

10. Holder

10-1 Handpiece Holder

While the Handpiece is not in use, put the Handpiece on the Handpiece
Holder. (Fig.14)
NOTICE
To prevent injury, always mount Scaler Tip Cover S.
CAUTION for Handpiece Holder
• Do not place in contact Tip with Handpiece Holder.
• Put straight the Handpiece. Do not incline it.
• Handpiece Holder may get dirt for water scale. In this case wipe it off with
alcohol immerses cloth.

10-2 Tip Holder (Option)

For a Tip removed from the handpiece, use the Tip
Holder. (Fig.16)
11. Care and Maintenance
11-1 Cleaning of Optic Fiber (Varios2 Lux)
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol soaked cotton swab. (Fig.17)
CAUTION
Do not use any sharp pointed tools to clean the Optic
Fiber End Face. In case the light degridation, contact
dealer.
Tip
Optic Fiber End Face
10
Handpiece Holder
Fig.14
Fig.15
Tip Holder
Fig.16
Fig.17