GYS GYSPACK 400 Manuel D'utilisation page 9

Translation of the original instructions
EN
GYSPACK 400 / 600
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your
device and the precautions to follow for your own sa-
fety. Ensure it is read carefully before first use and keep
it handy for future reference. These instructions should
be read and understood before anyone operates the
product. Any modifications or maintenance that are not
specified in the manual should not be undertaken. The
manufacturer is not liable for any injury or damage due
to non-compliance with the instruction manual. In case
of problems or uncertainties, please consult a qualified
person that is able to handle the device correctly. This
device should only be used for charging and / or start-
up and / or power supply within the limits indicated on
the device and in the manual. The safety instructions
must be followed. In case of improper or unsafe use, the
manufacturer cannot be held responsible.
Device suitable for indoor use only. Do not expose to
rain or excessive moisture (charger).
This device may be used by children from age 8 and by
persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge, provided
that they are under supervision or have been told how
to use the device safely and are aware of the potential
risks. Children must not use the device as a plaything.
Cleaning and servicing tasks may not be carried out by
children unless they are supervised.
Do not use for charging non-rechargeable batteries.
Do not use any charger other than the one supplied
with the machine to charge the batteries.
Do not operate the device with a damaged power
supply cord or a damaged mains plug.
Do not use the device if the charging cable appears
to be damaged or assembled incorrectly in order to
avoid any risk of short circuiting the battery.
Never charge a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject it to
heat or to longterm temperatures exceeding 60°C.
Do not obstruct the cooling vents. Refer to the installa-
tion section before operating the machine.
9