Commissioning And Standard Use; Switching The Installation On; Programming A 2- Or 4-Button Remote Control - SOMFY FREEVIA Mode D'emploi

2

COMMISSIONING AND STANDARD USE

2.1 Switching the installation on

1. The indicator flashes (twice).
The motor is switched on and awaiting
auto-programming.

2.2 Programming a 2- or 4-button remote control

1
• Position the remote control to be
programmed on the control electronics
target.
6
EN - Replacing the FREEVIA electronics unit - SOMFY
2. If the indicator light
the number of flashes is not as expected: see
diagnostic page 19.
2
• Briefly press the button on the remote control to be
programmed. The "RADIO" indicator light will come
on then go out when you release the button on the
remote control.
Complete opening is programmed on this button.
does not come on or
<0,5s