1
REPLACING THE ELECTRONIC UNIT
1.1 Installing the new electronic unit
For your safety, these operations must be carried out with the power supply switched off.
1
2
• Switch the
• Unscrew and remove the motor
installation
cover.
off.
4
• Install and screw the new electronic unit into place.
3
• Identify the 230V power supply
cable and the peripherals cables.
Until
they
are
reconnected,
accessories
wires
insulated (for example with a screw
terminal or insulating tape) to avoid any
risk of a short circuit.
5
• Clip the aerial on top of the motor.
EN - Replacing the FREEVIA electronics unit - SOMFY
the
must
remain
3