Removing And Cleaning Seat Lids - American Standard SpaLet Advanced Clean 3.0 Manuel De L'utilisateur

Removing and Cleaning Seat Lids

The seat lid can be removed easily. Detach the seat lid to clean the hidden hinge areas or to wash the whole lid.
Removing the Seat Lid
n Press the [Power] button to turn the power
1
off. Confirm that the power indicator turns
off.
n Hold the seat lid with both hands and lift it
2
up so that the right side opens outwards,
and then remove the pin from the pin
hole.
Seat lid
‚Open out-
ward
n Remove the seat lid by lifting and twisting
3
to to the left.
‚Move to the left
[Power]
Hold with both hands
Pin hole
Pin
Seat lid
Lift the seat lid up
[CAUTION]
● Make sure to disconnect the power plug before
removing the seat lid.
* Failure to do so may damage internal parts.
● Do not apply excessive force to the seat lid.
* Doing so may damage the part.
● Do not open the SpaLet
removed.
* Doing so could cause damage such as scratching
covers and the SpaLet seat.
● Do not use the SpaLet seat while the seat lid is
removed.
®
seat while the seat lid is
30 - EN