American Standard SpaLet Advanced Clean 3.0 Manuel De L'utilisateur page 36

Removing and Cleaning Seat Lids
2. Cleaning
Wipe the seat unit clean using a soft
cloth dampened with water.
Wipe off here.
* See the user manual for details on cleaning
the toilet bowl.
DANGER
Do not pour water or cleanser inside this
product. Do not splash water on the seat
unit or the power plug.
* There is danger of electric shock or fire.
CAUTION
unting plate
When cleaning the toilet bowl, take
care not to splash the seat unit with
detergent. Before installing the seat
unit, wipe the detergent off from the
toilet bowl using a cloth damped
2
with water.
* Leaving detergent on the seat unit may
lead to product failure.
1
Do not put your hand or any object
inside the air outlet or around the
nozzle.
* Doing so may injure your hand or lead to
product failure.
33 - EN
5. After completing the assembling, perform an operational
Turn
CAUTION
counterclockwise.
Check that the seat unit has been completely locked in place.
* If not, the seat unit may slide off the toilet bowl.
* Doing so may permanently deform it or cut off the water supply.
3. Assembling the Seat Unit
1. Place the seat unit on the toilet bowl. Align the inverted triangle
mark ( ) on the mounting plate with the protrusion on the rear of
the seat unit.
"
Protrusion on the
rear of the seat unit
2. Slightly raise the front of the seat. Slide the seat on to the
mounting plate. Push the lock lever to secure the seat.
* If this product is not pushed all the way back, the lock lever
cannot be pushed back in.
After locking this product in place, shake it slightly back and forth
and left and right, making sure it has been securely locked in place.
3. Open the water shut-off valve to
its original position and run water
through this product.
* Make sure water is not leaking
from any of the joints.
4. Insert the power plug into the outlet.
At this time, check to make sure the water temperature and seat
temperature indicator LEDs are illuminated.
check.
Do not bend any hose using excessive force.
" mark on the mounting plate
Turn
counterclockwise
2
1
Turn
countercloc