American Standard SpaLet Advanced Clean 3.0 Manuel De L'utilisateur page 48

Troubleshooting
Back Cleansing, Back Cleansing-Mild, and Front Cleansing (Continued)
Symptom
The nozzle spray
is not warm.
The spray does
not reach the cor-
rect position.
Nozzle spray is
weak.
Nozzle is discon-
nected (hanging)
The spray may
be stronger or
weaker than
models you have
used in the past.
45 - EN
Cause
The water temperature is not set to
an appropriate temperature.
The temperature of the water being
supplied is relativerly cold.
When purchasing a replacement model, the position that the spray
reaches may feel different due to changes in product design.
This is a feature of the product and is not a malfunction.
The spray strength is low.
The nozzle shutter has been
brushed off during cleaning.
When purchasing a replacement model, the spray may feel stronger
or weaker compared to the product before replacement due to design
changes.
This is a feature of the product and is not a malfunction.
Solution
Set the water temperature to an ap-
propriate temperature.
This is not a malfunction.
When water temperature drops,
such as in winter, spray strength
may weaken slightly.
Press the [ + ] side of the [Spray
Strength] button.
Attach the nozzle shutter correctly.
Page
10
-
-
15
36
-