Activating And Deactivating Additional Functions - Angelcare AC115 Manuel Du Propriétaire

4
6
The low temperature range is 41 to 66°F
(5 to 19°C) and high temperature range is
71 to 99°F (22 to 37°C).
NOTE:
Make sure to turn ON Temperature alarm to be able to set Temperature range.
TEMPERATURE ALARM
• Alarm activates when the temperature reaches the maximum or minimum set
temperature.
• Parent Unit will emit 3 consecutive beeps, every 5 seconds if the temperature reaches
levels out of your chosen range. The relevant icon will flash on the Parent Unit screen
to alert you.
• The Nursery Temperature Indicator will turn blue if the temperature is too cold or red
if the temperature is it too hot.
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
6.1 - ACTIVATE OR DEACTIVATE TEMPERATURE INDICATOR ON NURSERY UNIT
With this option the Nursery Unit Temperature Indicator will light up in colour when the
temperature goes above or below your preferences. If the temperature goes above your
set preferences and this option is turned ON, the light on the Nursery Unit's will turn to red
instead of the default white. If the temperature goes under the set preferences, then the
light will turn blue.
ON/OFF
Temperature
light
6.2 - OUT OF RANGE SETTINGS
Your monitor has an Out-of-Range alarm that advises you when your two units are not
communicating. Out-of-Range situations can be caused by distance or by physical interferences.
RANGE:
20
5
4) Press the OK button once again.
The Sun (High Temperature
icon) will blinks.
5) Use the UP and DOWN arrows to set
the HIGH temperature alarm (71 to
99° Fahrenheit / 22 to 37° Celsius).
6) Press the OK button to go to the next
setting or press the EXIT button to
confirm your choice.
Red - Room temperature is too hot
Blue - Room temperature is too cold
White - Room temperature is good