Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING
STRANGULATION HAZARD
• Remove all slack from Sensor Pad Cord.
• When lowering the mattress support
as your child grows, slide the vertical
Cord Cover downward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
STEP 3 - SETTING UP THE NURSERY UNIT
Select a location for the Nursery Unit that is at least 1 m away from the crib.
1
6
5
Sensor Pad
5
2
MUST BE MORE THAN
3 FEET (1 METER) AWAY
4
3
2
1
6
• The Sensor Pad is not designed
for use with adults, children or infants
older than 24 months.
• Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from crib and store
for future use.
• BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
1) Remove the batteries cover and
insert 2 AAA Alkaline Batteries
(not included)
Note:
The batteries maintain power
supply in case of power outage.
2) Install the Nursery Unit on a flat,
stable surface facing the crib at
a distance of at least 3 feet
(1 meter) and plug the Sensor
Pad cord into the Nursery Unit.
3) Check to make sure the Sensor
Pad has not moved from
position.
4) Place the mattress back inside
the crib.
5) Connect the USB plug to the
Nursery Unit.
6) Connect the USB plug with the
power adapter and then with an
electrical outlet.
E
N
11
Publicité
Chapitres
Table des Matières
