Angelcare AC115 Manuel Du Propriétaire page 17

IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than
24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's crib
and store it away.
5.5 - SOUND
TO ACTIVATE SOUND:
1
3
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep both
units at least 10 feet apart (3 meters).
apart.
ADJUST THE
SOUND LEVEL
2
IF YOU HEAR NO SOUND:
• Check that both units are powered ON.
• Check that both units are plugged into
• Check the batteries in both units
• Bring the Parent Unit closer to the
PUT IN
MUTE MODE
Raise
volume
Lower
volume
1) Press and hold the MENU Button
then press the OK button till the
Sound Monitoring icon blinks.
The sound monitoring
icon will blinks.
2) Using the UP and DOWN arrows, turn
the function ON or OFF.
3) Press the EXIT button to confirm
your choice.
functioning electrical outlets.
(replace or recharge them if necessary).
Nursery Unit.
PUT IN DIALOGUE
MODE
Press the
VOLUME - till
L0 is being
displayed
E
N
Press and
hold talk
button to
speak to
baby
17