Step 6 - Activating And Deactivating Additional Functions - Angelcare AC1300 Manuel De L'utilisateur

STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS

IMPORTANT
When in the menu or sub-menu modes, sound transmission between Parent and Nursery Units will
be temporarily deactivated. ONLY the movement detection alarm will remain active (if function is
activated).
6.1 - VOICE ACTIVATION (VOX) OR CONTINUOUS SOUND MODE
Allows you to select your option on how you monitor sound: VOX (voice activation picks up sound
based on the setting of the sensitivity level) or Continuous (sound monitoring is continuously on,
picking up all sounds).
TO ACTIVATE VOX MODE:
NOTE:
By deactivating VOX the Continuous
setting is ON.
TO ADJUST THE SOUND SENSITIVITY (VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you set.
1
2
73 F
3 4
ON
20 sec
6.2 - HOLD
Allows you to put your monitor on hold.
1
2
2 4 3
73 F
IMPORTANT
When your monitor is on Hold, the movement-
detection feature and movement alarm are disabled.
All manuals and user guides at all-guides.com
1) Press Menu icon to access the main menu.
2) Select the Settings icon to access
3) Select the VOX icon to activate or
4) Press Menu/Select button to confirm.
1) Press Menu/Select button to access
2) Select the Settings icon to access
3) Select the VOX Sensitivity icon.
4) Use the up and down arrows to choose
5
5) Press Menu/Select button to confirm.
1) Press Menu/Select button to access
2) Select the Hold icon.
3) Hold icon will appear on the screen.
4) Press and hold the Nursery Unit
sub-menu.
deactivate the VOX function.
the main menu.
sub-menu.
the desired sensitivity level (1 to 5)
main menu.
OR
Press and hold the Nursery Unit Pager/
Hold button for at least 2 seconds.
Pager/Hold again to return to normal
operation.
Nursery Unit Night Light will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on Hold.
E
N
13