Step 5 - Activating And Deactivating Additional Functions - Angelcare AC1120 Manuel Du Propriétaire

STEP 5 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS

5.1 - SOUND TRANSMISSION (VOX)
Your monitor is 'Sound Activated'. This means that it will transmit sounds only when it
detects them. It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO ADJUST THE SOUND SENSITIVITY(VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you
set.
1
5.2 - ALARM
Allows you to select your preferred alarm mode for the Parent Unit.
1
14
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by
pressing the OK icon.
3
2
3
2
IMPORTANT
When in the menu or sub-menu
modes, sound transmission between
the Parent Unit and the Nursery Unit
will be temporarily deactivated.
1) Press Menu icon to access
OFF
the main menu.
2) Press Settings icon
to access sub-menu.
3) Press VOX sensitivity icon to choose
ON
OK
sound sensitivity level (1 to 4).
4) Press OK to confirm.
1) Press the Menu icon to access
OFF
main menu.
2) Press the Settings icon
to access sub-menu.
ON
3) Press the Alarm icon to change
OK
the alarm mode.
4) Press OK to confirm.