EKOM DK50 2V/50/M Manuel De L'utilisateur page 60

21.1. Home screen
Hour meter
Dryer operating mode
Current pressure in dryer
Switch to display dryer
operation
(*this information is only shown if the compressor is equipped with a dew point sensor)
- Basic information and measured parameters are shown on the dryer home screen. The
dryer operating hours indicator is located at the top of the screen. The home screen has 4
main tiles that display the following information:
- Dryer operating mode (see chap. 20.1).
- Current pressure in the dryer (min. working pressure to activate dryer regeneration is 3
bar)
- Current pressure dew point value (only for compressors equipped with dew point sensors).
Remaining time to the next service interval (see chap. 22.1, 22.2 – service intervals).
-
Service interval length menu
Pressing and holding (at least 2 seconds) the service interval length menu icon opens a
scrolling menu showing the individual service actions that must be performed. Pressing a
selected row shows information with data on the number of working hours or calendar days
remaining until the next service is required. Service actions are typically completed once a set
number of compressor working hours or calendar days have passed. The condition that occurs
first is relevant. The notification of an upcoming service is displayed either 100 working hours
before the working hours interval is reached, or 30 calendar days before the calendar days
interval has elapsed (see chap. 22.1).
NP-DK50 2V 50, 2x2V 110-AD-1_03-2022 60
AD DRYER
Current dew point*
Service interval
menu
Switch to language
selection
length
03/2022