DK50 2x2V/110
Remove the mounts used to secure the aggregate in transport: use a 10 mm wrench to remove
the upper bolts, and then use a 13 mm wrench to remove the lower side bolts (Fig. 7).
Prior to installation, ensure that the compressor is free of all transport packaging
and stabilizers to avoid any risk of damage to the product.
Remove all devices used to secure the aggregates once the compressor is
installed and levelled at the site of final installation.
NP-DK50 2V 50, 2x2V 110-AD-1_03-2022
34
INSTALLATION
03/2022