EKOM DK50 2V/50/M Manuel De L'utilisateur page 58

Symbol for chamber pre-filling – equalisation of pressure in chambers.
max max
0
20.2. Initial language settings for the user interface
The option to select a language appears when the program is first launched. The service
technician selects the given language during installation based on the geographic location of the
dryer installation. The program saves and remembers this setting. The option does not appear
when the program is restarted.
LANGUAGE SETUP
GER
RUS
ADSORPTION DRYER
IS ON
20.3. Setting the date and time during commissioning
It is recommended to set the date and time during commissioning. These settings are changed
in the service menu in the SETUP section. Access to the service menu is protected by a code
(1992). In SETUP you have to tap down arrow to set date and time. In the same way, it is
possible to reset the user interface language via LANGUAGE SETUP.
NP-DK50 2V 50, 2x2V 110-AD-1_03-2022
LANGUAGE SETUP
CZ SK
UK
CONFIRM THE
HUN
LANGUAGE:
FR
Indication the device is operating
Indication of an alarm state
(on until the alarm state no longer
exists)
RUN
CZECH

E N T E R
58
AD DRYER
03/2022