I
5.3 SOSTITUZIONE PLAFONIERA
Per la sostituzione della PLAFONIERA bisogna:
1-
Effettuare le operazioni del punto 5.1.
2-
Togliere la copertura in plexiglass sganciandola
dalla sua sede (pos.1 Fig.27).
2-
Smontare la lampada agendo sui suoi terminali,
ruotandola ed estraendola (pos.2 Fig.27).
5.4 SOSTITUZIONE RESISTENZA ANTICONDENSA
ATTENZIONE!
Chiamare assistenza Tecnica Sifa.
Fig.27
Fig.27
Abb.27
Fig.27
1
GB
5.3
REPLACING THE LAMP
To replace the LAMP, proceed as follows:
1- Follow the instructions given in point 5.1.
2- Remove the Plexiglas cover by unhooking it from its
position (pos. 1, fig. 28).
3- Remove the lamp, rotating it until it can be pulled away
from its end attachments (Pos. 2, Fig.27).
5.4 REPLACING THE ANTI -CONDENSATE RESISTOR
CAUTION!
Contact the Sifa Technical Assistance Service.
2
70
1