Alarms Display - DAB EEG0,75T3 S Serie Instructions De Mise En Service Et D'entretien

Display of alarms, INFO pages.
12.
ALARMS CAUSE OF ALARM
LIST
AL1 Set motor working hours have
been exceeded.
AL2 Error in parameters
- PSET > Pn + Pasp
- Pn + Pasp > PF.S. sensor
AL3 Output
circuited
AL4 T1 Transducer
AL4 T2 interrupted or inverted.
[305] System supervisor
OFF – no supervision;
GSM - supervision by the additional gsm
module;
[306] GSM text message
Allows you to choose every how many
days to receive SIM credit on your phone.
- Perform
- Check setting of the
- Check setting of the
- Check the presence
terminals short
- Automatic attempt to
- AL4 T1 if transducer 1
connection
- AL4 T2 if transducer 2
ENGLISH
RESET/CHECK
pump
maintenance and
reset the work hours
(keep the respective
stop held down for
more than 5 seconds
on the work hours
page)
parameters 123, 124
and 125.
parameters 108, 110,
110', 111 and 112,
ensuring that:
PFS>=(Pnom+Pasp)
(Pnom+Pasp)>Pset
of short circuits
between the terminals
+, GND or +, of the
board KL4.
reset every 30sec
98
Field Default settings
OFF, GSM
0-:-60 gg
EFFECT
IN THE SYSTEM
P1, P2, P3 operate
regularly
System stopped.
System stopped.
System remains
stopped.
N.B. In a system with
a single transducer in
the event of fault
ALT1 the control unit
automatically looks
for the second
transducer. If
connected, it still
works in regulation,
otherwise it changes
to pressure switch
control.
(if enabled).
OFF
14
REMOTE ALARM
RELAY
Remote signal
Remote signal
Remote signal
Remote signal