Basic Safety Instructions - Burkert Type 2000 Manuel D'utilisation

Type 2000/2002

Basic safety instructions

3. Basic safeTy insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger!
danger – high pressure!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
Caution!
risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
Warning!
general hazardous situations.
To prevent injury, ensure that:
• The system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
The angle seat valve type 2000 / globe valve type 2002
was developed with due consideration given to accepted
safety rules and is state-of-the-art. However, dangers can
still arise.
Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices
and accessories!
english
7