24.1.3
General checks
a) Check that all nuts and bolts are properly tightened and threadlocked.
b) Check that all bolts subject to rotation in use are correctly split-pinned.
c) Check that all electrical connections are properly made, with no risk of short-
circuiting.
d) Check that all fuel, oil, and water pipe clips and other connections are properly
tightened and sealed.
24.2 Baggage Bag
a) Loop the rear securing straps around the base of the rear fuselage bracing
frame at its lower corners, with the buckle towards the fuel tanks.
The strap should loop around the back of all the tubes.
b) Pass the upper securing straps around the upper rear fuselage tubes above,
but not around, the turnbuckles.
The straps will have to be slid back down the tubes for them to reach.
c) Burn a hole through each strap where the Velcro is, and secure with small
pan-head bolts, with the pan-head towards the tube.
Nynja Manuel de montage Version 5
Figure 231; rear securing strap.
268