- a "mounting shoe", fitted (TU32H) or to be fitted (TU16H)
on the attachment fitting,
- a special wire rope "SUPERTIRFOR™", equipped with a
hook, with standard length of 20 meters, mounted on a
reel,
- a self-reciprocating hydraulic ram SUPERTIRFOR™ (VA2
for TU 16H or VA3 for TU 32H),
- a 20 L can of special hydraulic fluid for the hydraulic
pump,
- an extending handle,
- this manual,
- a compliance certificate,
- the gasoline engine supplier manual (power pack with
gasoline engine),
- the TIRFOR
®
machine user manual for manual operation,
- 2 sets of replacement safety pins SUPERTIRFOR™ per
machine (TU16H: 6 safety pins SUPERTIRFOR™,
TU32H: 2 safety pins SUPERTIRFOR™).
GB
NOTE
removable covers on each outlet which you should keep.
For SUPERTIRFOR™ wire rope lengths exceeding 80 m,
contact TRACTEL
1.4 Applicable regulations and standards
The TU16H and TU 32H equipment complies with the
"Machines" directive No. 98 / 37 / CEE (equipment lifting
devices) and with Directive 2000 / 14 / CE relative to sound
emissions in the environment by equipment intended for
use outside buildings.
1.5 Compatible accessories
TRACTEL
can supply, optionally, a hook which is secured
®
to the anchoring pin of the TU 32H, TRACTEL
21877.
: The hydraulic power pack comes with
®
.
With a view to the on-going improvement of its products,
TRACTEL
®
reserves the right to make any changes it may
deem necessary, at any time, to the equipment described
in this manual.
The companies forming part of the TRACTEL
their approved retailers will provide you, on request, with
documentation covering the complete range of TRACTEL
products:
Lifting and pulling machines and their accessories, worksite
and facade access equipment, load handling safety
devices, electronic load indicators, etc.
The TRACTEL
service and periodic maintenance.
®
reference
- 6 -
®
network can also provide after-sales
®
group and
®