Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 112
GB
ENGLISH
Figure 15: Diagram of possible menu accesses
6.3 - Structure of the menu pages
When switched on, some presentation pages are displayed showing the
name of the product and the logo, after which the main menu appears.
The name of each menu, whichever it may be, is always at the top of the
display.
The following always appear on the main page:
Status: operating status (e.g. standby, go, Fault, input functions)
Revs per minute: value in [rpm]
Pressure: value in [bar] or [psi] depending on the set unit of measure.
Power: value in [kW] of the power absorbed by the device.
84
If the case occurs the following may appear:
Fault indications
Warning indications
Indications of the functions associated with the inputs
Specific icons
The error or status conditions that can be seen on the main page are
listed in Table 10.
Error or status conditions shown on the main page
Identifying code
GO
Motor running
SB
Motor stopped
BL
Blockage due to water lack
PB
Blockage due to supply voltage outside specifications
OC
Blockage due to overcurrent in the electropump motor
SC
Blockage due to short circuit on the output phases
OT
Blockage due to overheating of the power stages
BP
Blockage due to fault of the pressure sensor
NC
Pump not connected
F1
Float function status / alarm
F3
System disable function status / alarm
F4
Low pressure signal function status / alarm
P1
Operating status with auxiliary setpoint 1
P2
Operating status with auxiliary setpoint 2
P3
Operating status with auxiliary setpoint 3
P4
Operating status with auxiliary setpoint 4
Com. icon with
Operating status in multi-pump communication with the address
number
indicated
Description

Publicité

Table des Matières
loading

Table des Matières